|
Post by privateer on Feb 17, 2004 1:22:04 GMT -5
Anybody have any tips on plumbing? I am a a little confused on hose sizes and fittings. Any tips or advice would be helpful.
Thanks
|
|
|
Post by admin on Feb 17, 2004 8:41:23 GMT -5
Here is a tip for using the braided hose...
Use a good quality silver solder and tin the entire length of the hose with a light coat of solder. Be sure to use extra flux to make it flow into the braid. You just want enough to make the hose stiff. Now when you cut the ends of the hose the braids will not fray and will fit in the connectors perfectly. Also the hose can be bent to the proper shape, and will hold that shape while test fitting and gluing.
Tim
|
|